HOME    PROJECTS    LIBRARIES    RESOURCES    LINKS    CONTACT  
Select category:
Arduino
chipKit
ESP8266/32
TI LaunchPad
  URTouch
  UTFT
  UTFT_Buttons
  UTFT_Geometry

IF YOU LIKE,
and use any of my projects or libraries, and would like to encourage further development you can donate through PayPal here:

Rather donate hardware directly? Then click here.




Library: URTouch

This library is primarily an add-on to my UTFT library for TFT display modules.

3.2" TFT LCD Screen Module: ITDB02-3.2 by ITead studio2.4" TFT LCD Screen Module: ITDB02-2.4 by ITead studio

As stated earlier, this library is primarily an add-on to UTFT, but the library in it self does not require UTFT. The supplied examples DO however require the UTFT library.

 IMPORTANT: 

This library is intended for use with the Energia IDE.

Download:

URTouch.zip
(Filesize is 422.92 KiB. Downloaded 109023 times)


Some demos showcasing most of the functions are included in the download.
This is a multi-platform library that will work with several different development board types.

Latest changes:
v2.0019 Jun 2016changed the name of the library to URTouch due to trademark issues
v2.0112 Jul 2016added support for the new 3.2" (Rev2 ILI9341-based) display module from Coldtears
v2.0206 Aug 2018added support for the V2 displays and shields from ITead
  removed all support for display modules from ElecFreaks
For a full list of changes please see the file version.txt included in the download.

Nice to know:

A program to calibrate the touch screen is included in the download. If your touch screen is inaccurate you simply install and run URTouch_Calibration. Follow the on-screen instruction to calibrate your touch screen.

The supplied calibration parameters are fairly accurate on my 3.2" S module. If you are using any other module you will have to run the calibration. For the best possible results you should run the calibration in any case.

More information about calibration can be found in the included manual. Make sure you read the manual before running the calibration sketch.

The D_BUSY signal is not needed and can be left floating/unconnected.

This is the same library as the previous UTouch library but the name had to be changed due to trademark issues.

Compatibility:

WorkingCC3200 LaunchXL
Working = Working   Not working: Not working
Not tested, Unsupported = Not tested, Unsupported

Manual:

CLICK HERE TO VIEW
The manual is included in the download

License:

By downloading the library you accept the following license:
Creative Commons BY-NC-SA Logo
Creative Commons (CC BY-NC-SA 3.0)
View SummaryView Legal